We Provide




Pre-Painted Galume Trapezoidal Profiled Steel Sheet
• Overal sheet width before profile is 1220 mm (+/-10)
• Overal width after profile is 1070 mm (+/-10)
• Effective covered width is 1010 mm (+/-5)
• Pitch is 250 mm (+/-2)
• Depth TP1 is 30 mm (+/-2)
• Depth TP is 2.5 mm (+/-2)

 

 

 

Pre-Painted GI / Galume Trapezoidal Profiled Steel Sheet
• Overal sheet width before profile is 1220 mm (+/-10)
• Overal width after profile is 1030 mm (+/-10)
• Effective covered width is 930 mm (+/-5)
• Pitch is 186 mm (+/-2)
• Depth 32 mm (+/-2)

 

Galume Wall Cladding Profile Steel Sheet
•Actual Supply Width:1108 mm
•Effective Width : 1060 mm (+/-10)
•Pitch is 106 mm (+/-2)
•Depth 10 mm
(+/-2)

BH 1010 PROFILE

BH 930 PROFILE
BH 1060 PROFILE
 
 
Colour Coated Tiles 
Pre-Painted Galume Tile Profiled Steel Sheet
• Overal sheet width before profile is 1200 mm (+/-10)
• Overal width after profile is 1006 mm (+/-10)
• Effective covered width is 950 mm (+/-5)
• Pitch is 190 mm (+/-2)
• Depth P1 is 27 mm (+/-2)
• Depth P2 is 2.5 mm (+/-2)
• Depth of step is 15 mm 

 

Colour Coated Coil
Introduction:
Coil coating is the most advanced techniques used in the continuous application of an organic coating on to a flat metal substrate in the coil form
Coil Coating Process:
• CLEANING OF SHEET
• CHEMICAL COATING
• DRYING
• PRIMER APPLICATION(ON BOTH TOP &BOTTOM)
• CURING OF PRIMER
• TOP COAT & BACK COAT APPLICATION
• CURING OF TOP & BACKING COAT
• GUARD FILM APPLICATION
 
  BH TILE PROFILE
 

Cross Section of Coil Coated Metal



Copyright © 2011 Anuj Steel Center, Kolhapur
powered by Jaym Infotech. Optimised for 800x600 monitor resolution